Good Design Spoon Metal Lure Fishing Lure
|Purchase Qty. (Pieces)||FOB Price|
|1,000-1,499||US $1.25 / Piece|
|1,500-1,999||US $1.21 / Piece|
|2,000+||US $1.19 / Piece|
The lure length :55mm weight:14g
if you interesing in it please contact with us freely
Usage of spoon,
The cold northern winter have greatly small water ice, but a lot of fishing for detoxification, still go ice fishing, but also has the skill to go ice fishing. When using a method of float bottom fishing for ice fishing, usually using 3-5 with the fishing rod, can sometimes be used more. The ice eye distance should be based on a few anglers and fishing rod set. With the rod, ice eye distance between farther, with the distance between the poles, the eye of ice near 3 as appropriate, with fishing, ice eye spacing to 90-100 cm is appropriate; with 5 or more than 5 fishing, ice eye spacing to 50-60 cm is appropriate. Also note that the shallow water fish fishing, ice the distance can be smaller; water fish fishing more, the cave spacing is bigger. The aim is to prevent the fish hook fishing line two hole together. There is no requirement for the arrangement of the ice eye, and it is easy to operate and easy to see when the fish is a fish.
There are two kinds of common ice eyes. One is single row fan or a single row. According to this method made each ice eye and an angler seat is basically the same distance. Therefore, the use of equal length rod can be delivered to each eye of ice bait. Another way is to put the ice into the eye of the two line, eye position. In order to cut 5 ice eye as an example: in front of a row of 3 ice eyes, behind a row of 2 Ice eyes, ready to use 3 anglers longer rods and 2 shorter fishing, this design method is naturally very smoothly. If the vice rod 7-8 above, can also be arranged in a chisel cut into three or four four three positive and negative trapezoidal mode. In addition, if you want to take his method of float fishing, or fishing bait hook up to 2 pole, left and right sides of a rod for his.
After a good catch, to cut ice. A chisel ice, ice pick ice ice must be cut diagonally, easy cracking damage, breaking speed. If the vertical ice, the ice is thin when the ice is thick a little cut down just a white spot, not only time-consuming, but the effect is not good. Under normal circumstances, the ice hole should be cut into a round hole of about 20-30 cm in diameter. As to fish the waters of the ice, to the appropriate opening; basic is a small carp fishing, ice can also be cut smaller. Each ice cave in on their own as a side, should be cut into the shape of a slope, the fish hook, easy to put it on ice. Cut ice eye, it should be around the sharp cut mouths rub flat, prevent fish ice or ice stuck joints hurt the line running fish float.
If you are interesting in our products please contact with me freely